Type: Driver
File Name: hp_pavilion_16376.zip
File Size: 21.1 MB
12 (4.47)
Downloads: 11
Supported systems: ALL Windows 32x/64x
Price: Free* (*Free Registration Required)

Download Now

I would go to turn it on and the fans spun but then it would shut off. Sometimes it would go on and would shut down randomely. I sent it to Toshiba with no clue whats going on HP Pavilion ze4600 VGA it. Does anyone know what tthe problem could be so I dont get messed with the company?

I know ofr a fact that it isnt a virus because I was able to to a full system recovery. If anyone knows what it could be, please help. When I have a weird laptop problem and cannot figure out what is wrong, I take it completely apart and assemble a basic system outside the laptop box, right on my bench. Assemble everything together outside the laptop base, connect an external monitor and turn it on. If it still will not boot up, then one of three components is bad. You already replaced HP Pavilion ze4600 VGA CPU, so it would be either the system board or the memory. If you can boot the basic system, start assembling it back and test after each step.

HP Pavilion ze4600 VGA

HP COMPAQ Laptop Schematic

Make sure that you put correct screws into correct holes. Zak August 20, Thanks cj for the advice, I really appreciate. I am definitely going to try that route to narrow down the problem. My compaq presario laptop i thought was damaged on the plane ride over here. It starts up for a few seconds and shuts off just like yours. It has turned on a few times and when it turns on, i can HP Pavilion ze4600 VGA whatever with it, and it works flawlessly. I can reboot it without any issues. But if i shut it down, or shut it off, it will not turn back on and have the same issue.

If you could please email me if you can help.

Pavilion - reset hole for hp pavilion computers - hp pavilion dv recording

You can also try moving it to the second slot. If you can find any test memory, install it instead of your module and test if it makes any difference.

From your HP Pavilion ze4600 VGA I cannot give you a better advice; it could be anything from a loose connection to a bad hardware. I would also try to minimize the system, remove modules hard drive, DVD drive, wireless card, any other cards one by one and try to turn it on after each removed part. Billy September 3, Thank you for getting back to me, I will give those a shot. Then it came back and said 9 hundred whatever after I did that.


The computer actually turned back on right after I went out from writing your email yesterday first try like HP Pavilion ze4600 VGA was wrong. Thanks for your help. I honestly sitched out every switch out quick component hard drive memory you name this artice and this site saved me. Try removing them one by one.

Try starting the laptop with only one RAM HP Pavilion ze4600 VGA installed. If it starts fine with one module but not with another, the second one is bad. Does not seem to matter whether the laptop is running on battery or AC. I push the power button, nothing happens. Push it again over and over, eventually it will power on. Runs normal when powered on, and if I do a soft restart, it shuts down and powers up normally. But if I shut down completely, the next HP Pavilion ze4600 VGA I hit the power button I have to hit it over and over until one time it works.


So, could it be the AC, motherboard, power board, or something else? Could be corrupted registry.

Pavilion ze4600 will not start

Can you boot in Safe Mode? Free Download HP Pavilion ze VGA Driver (Graphics Board).

I have the hp Pavilion ze and i want to install Windows 7 but i could not. The VGA drivers cannot be installed. Is there any way to solve thisĀ  Hp Pavilion dvnr Network Drivers for Win7.

Related Drivers