ASROCK EP2C602-4L ASPEED GRAPHICS DRIVERS FOR MAC DOWNLOAD
ASROCK EP2C602-4L ASPEED GRAPHICS DRIVER DETAILS:
|File Size:||12.4 MB|
|Supported systems:||Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10|
|Price:||Free* (*Free Registration Required)|
ASROCK EP2C602-4L ASPEED GRAPHICS DRIVER
Failure to do so may cause physical injuries to you and damages to motherboard components.
Asrock Ep2C602 4L D16 Owner S Manual
Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components. Hold components by the edges and do not touch the ICs.
Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components. When placing screws to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage ASRock EP2C602-4L ASpeed Graphics motherboard.
|Asrock B85M-HDS R2.0 Intel Smart Connect||Ratings & Reviews|
|Asus X54H BIOS Flash||More Views|
|Asus R503A Notebook||Specifications|
|Hercules Wireless G PCI HWGPCI-54-LB||Additional information|
Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Step 1.
Open the socket: Step Disengage the left lever by pressing it down and sliding it out of the hook. Disengage the right lever by pressing it down and sliding it out of the hook. Keep the right lever positioned at about 90 degrees in order to flip up the load plate.
Step 2. Insert the Pin CPU: Hold the CPU by the edge with the triangle mark Pin 1 on your upper right corner. Locate Pin1 and the two orientation key notches.
Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys.
Asrock Ep2C 4L D16 Owner S Manual
Step 3. Close the socket: Flip the load plate onto the IHS, then the cover will automatically come off by itself. The cover must be placed if returning the motherboard for after service. Press down the right load lever, and secure it with the load plate tab under the retention tab.
Press down the left load lever, and secure it with the load plate tab under the retention tab. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat.
Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer ASRock EP2C602-4L ASpeed Graphics the instruction manuals of your CPU fan and heatsink.
Below is an example to illustrate the installation of the heatsink for Pin CPU. Apply thermal interface material onto center of IHS on the socket surface. Apply Thermal Interface Material Step 2.
Place the heatsink onto the socket. EP2CL/D16 GB; 4 PCIe x16, 1 PCIe x4, 1 PCI; ASPEED AST graphics, 1 VGA: D-Sub; 8 SATA2 ( Gb/s) by Intel C, Supports RAID. File name: ASRock_EP2CL/D16_ASpeed_Graphics_Driver__for_Windows_7/ File size: MB ASRock EP2C602-4L ASpeed Graphics latest.